Ryan Malloy
e57fbc41e3
Adds CONF_PCA_PATH + CONF_PCA_KEY config-flow fields. When set, the coordinator parses programs from the .pca file at that path instead of streaming them over the wire on every entry refresh. Useful for: * deployments where wire enumeration is slow (1500-slot iteration) * offline snapshots when the panel is unreachable * deterministic test setups against a known fixture The config-flow validates the file is readable and decrypts cleanly, surfacing pca_not_found / pca_decode_failed errors via the strings/ en.json translations. The .pca path is checked first in _discover_programs; if absent the wire path runs as before. So existing deployments are unaffected. Tests cover the success path (live fixture, 330 programs) and the two validation failures (missing file, garbage bytes).
38 lines
1.9 KiB
JSON
38 lines
1.9 KiB
JSON
{
|
|
"config": {
|
|
"step": {
|
|
"user": {
|
|
"title": "Connect to your Omni panel",
|
|
"description": "Enter the IP/hostname of your HAI/Leviton Omni Pro II controller and the 32-character hex Controller Key. Use `omni-pca decode-pca <file>.pca --field controller_key` to extract the key from a PC Access export. Optionally provide a path to a saved `.pca` file to load panel programs from disk instead of streaming them from the controller.",
|
|
"data": {
|
|
"host": "Host",
|
|
"port": "Port",
|
|
"controller_key": "Controller Key (32 hex chars)",
|
|
"transport": "Transport",
|
|
"pca_path": ".pca file path (optional)",
|
|
"pca_key": ".pca per-install key (integer; 0 if plain-text)"
|
|
}
|
|
},
|
|
"reauth_confirm": {
|
|
"title": "Re-enter Controller Key",
|
|
"description": "The panel at {host}:{port} rejected the saved key. Paste the new 32-character hex Controller Key.",
|
|
"data": {
|
|
"controller_key": "Controller Key (32 hex chars)"
|
|
}
|
|
}
|
|
},
|
|
"error": {
|
|
"cannot_connect": "Could not reach the panel. Check the host, port, and that TCP/4369 is open.",
|
|
"invalid_auth": "The Controller Key was rejected by the panel.",
|
|
"invalid_key": "Controller Key must be exactly 32 hexadecimal characters (16 bytes).",
|
|
"pca_not_found": "No file at the supplied .pca path.",
|
|
"pca_decode_failed": "Could not decode the .pca file. Check the per-install key.",
|
|
"unknown": "An unexpected error occurred. Check the Home Assistant logs."
|
|
},
|
|
"abort": {
|
|
"already_configured": "This panel is already configured.",
|
|
"reauth_successful": "Re-authentication was successful."
|
|
}
|
|
}
|
|
}
|