First PyPI release of the v1 wire path. Wheel published from local
source 2026-05-11 with omni_pca/v1/ subpackage included.
What's in 2026.5.11 vs 2026.5.10 (already on PyPI):
* New omni_pca.v1 subpackage -- OmniConnectionV1, OmniClientV1,
OmniClientV1Adapter -- for panels that listen on UDP only and
speak the legacy OmniLink (not OmniLink2) wire dialect.
* HA integration wires the adapter into the coordinator when
Transport=UDP is selected at config-flow time; v2/TCP path is
unchanged.
* Streaming UploadNames discovery (bare opcode + lock-step
Acknowledge until EOD/NAK).
* Long-form RequestUnitStatus for unit indices > 255 (sprinklers,
named flags, expansion-enclosure outputs).
* Chunked status polls -- firmware 2.12 NAKs at ~63 records per
request, so we batch in groups of 40.
* OmniConnection.close() now sends ClientSessionTerminated so the
panel frees our session slot immediately on disconnect.
Verified end-to-end against a firmware 2.12 OmniPro II panel at
192.168.1.9: discovery (16 zones, 44 units, 16 buttons, 8 codes,
2 thermostats, 8 messages) + status polling + execute_command
round-trip all working under HA, side-by-side with the existing
TCP mock-panel path in the dev stack.
README: new "Two wire dialects" section explaining when to pick
TCP/OmniClient vs UDP/OmniClientV1.
manifest.json: requirements bump to omni-pca==2026.5.11.
- Move install instructions from PyPI-only to Gitea-release-first
(pip from git+https or direct wheel URL); note PyPI as 'pending'
- Add Project home + Documentation links at top
- Fix quick-start API name (get_system_info -> get_system_information,
matching the actual library)
- Replace HA quick-start with the manual-clone path that works today
(HACS support pending PyPI publish)
- Cross-link tutorials (first-script, dev-stack) and how-tos
(install-in-home-assistant) from hai-omni-pro-ii.warehack.ing
- Add Tests section showing how to run the suite
- Add License + JOURNEY link in acknowledgements
custom_components/omni_pca/services.yaml — declares 7 services with
config_entry selectors so HA's UI gives users a panel picker:
bypass_zone, restore_zone, execute_program, show_message,
clear_message, acknowledge_alerts, send_command (raw escape hatch)
custom_components/omni_pca/services.py — async handlers wired via
async_setup_services on entry setup; idempotent across multiple entries.
Each handler validates entry_id, looks up the right coordinator, calls
the matching OmniClient method. CommandFailedError wrapped to
HomeAssistantError; unknown Command codes raise ServiceValidationError.
async_unload_services removes them when the last entry unloads.
custom_components/omni_pca/diagnostics.py — async_get_config_entry_
diagnostics dumps a redacted snapshot for bug reports: panel model +
firmware, discovered/live counts per object type, sha256-hashed zone/
unit/area names (so uniqueness is visible without leaking PII), last
event class, controller key REDACTED via async_redact_data.
custom_components/omni_pca/__init__.py — wires async_setup_services on
entry setup and async_unload_services on the last entry unload.
custom_components/omni_pca/README.md — full entity table, service list,
example automation, troubleshooting section, link to JOURNEY.md.
Top-level README — entity rundown updated to reflect the full v1.0
surface (was: 'binary_sensor for zones').
331 tests still pass; ruff clean across src/ tests/ custom_components/.
hacs.json already in place from initial scaffold.
